Taurus Firearm Forum banner

1 - 18 of 18 Posts

·
Registered
Joined
·
156 Posts
Discussion Starter #1 (Edited)
WTS: Various RH/Ambi Holsters (see inside for list) - PA

Have a whole bunch of holsters and one belt that I don’t need, figure I’ll put ‘em up for the taking. Included are holsters for:
- Glock 26/27/33
- 1911
- S&W 3rd-gen compact pistols (6906, 3913, etc.)
- Ruger LCR
- other medium frame pistols (i.e., .380’s)

All holsters are right-handed (except for those which are ambidextrous).
_____

We’ll start with the belt. Comp-Tac Kydex Reinforced Contour Belt with the 1 ¼” taper. I think it’s a 34”, but it’s a bit too small for me. I have a 33” waist, and can only get to the second hole. Carrying IWB is pretty much impossible. Suggest you have a 30-32” waist if you want to buy this.



In good condition, though it’s got a few small/minor scuffs at the 9 o’clock position where I had clipped my BlackBerry and/or my flashlight. Goes for $90 on the Comp-Tac site, asking $75 shipped.
_____

Raven Concealment Systems Phantom holster only for G26/27/33. Only used two or three times.



Note: mag pouch has been sold and is no longer available for sale.

Retails on the RCS site for $80. Asking $75 shipped.
_____

Blackhawk Serpa carbon-fiber finish holster for G26/27/33 with the quick-release system attached to both the paddle and belt attachments. The screwheads on the quick-release system stripped a little when I was installing it, so I’m not really able to detach the quick-release system. Only used once or twice.



In otherwise very good condition. Asking $50 shipped for the whole setup.
_____

DeSantis OWB slide holster for a 1911 with thumb break for cocked/locked carry. Label says it’ll fit Government, Gold Cup, Officer and Commander models, as well as Kimber Ultra Carry and Pro Carry (note: does NOT fit Taurus 1911s...ask me how I know). Price tag ($64) is still on it.



Brand new, never carried; has only held a pistol twice, and that was to make sure it didn’t fit my Taurus 1911. *sigh* Asking $60 shipped.
_____

DeSantis Tuck This II IWB holster for “most medium frame autos” (per the label). Price tag ($28) is still on it.



Brand new, never carried. Asking $25 shipped.
_____

WRBUSA.com ambidextrous pocket holster for medium frame autos -- it fit my Browning BDA-380, and while my Ruger LCP also fits, the end of the muzzle is nowhere near the bottom of the holster.



Used but in good condition. Asking $10 shipped.
_____

WRBUSA pocket mag holder for .380 single-stack mags (LCPs and the like).



Used it a couple of times, still in good condition. Asking $10 shipped.
_____

Random pocket holster with a Velcro retention strap. Fits LCPs and the like.



Pretty much brand new, never used. Asking $5 shipped, free with the purchase of any other holster from me.
_____

DeSantis Thumb Break Scabbard holster for S&W 3rd-gen compact pistols (6906, 3913, etc.). Will NOT fit the DAO version (6946, 3953, etc.) with the slightly longer slide. Bought it brand new; I’ve had it for a few years, but have never carried in it.



Retails for $71 on the DeSantis site, but I paid a little less for it...asking $55 shipped.
_____

Comp-Tac Two O’Clock holster for a Ruger LCR. Has standard over-the-belt 1 ½” belt clip. Has a little adhesive residue on the bottom of the back side where I had put a small strip of moleskin to pad the edge. Perfectly good holster, rides a touch too high for me. NOT recommended for hip carry -- only for appendix carry.



In good to excellent condition, I only used it a handful of times. Retails for $70 on the Comp-Tac site, asking $60 shipped.

PM or email me (my email address is my username here at yahoo.com) to arrange payment.

Thanks for looking!
 

·
Registered
Joined
·
156 Posts
Discussion Starter #3
I'm not familiar with that pistol...let me measure my BDA-380 when I get home tonight and I'll send you PM.
 

·
Registered
Joined
·
115 Posts
I'm not familiar with that pistol...let me measure my BDA-380 when I get home tonight and I'll send you PM.
It sort of resembles a Walther PPK. Don't know the dimensions though.

Sadly the only holster I'd be interested in is the 1911...but my 1911 is a Taurus too haha. In what way does it not fit? I wouldn't think the dimensions would be that different from gov't model to gov't model (with the exception of rails, of course).
 

·
Administrator
Joined
·
17,818 Posts
It sort of resembles a Walther PPK. Don't know the dimensions though..


Offered for comparison.
On the left is my Walther PPK/S.........On the right was my Browning BDA .380
 

·
Registered
Joined
·
156 Posts
Discussion Starter #6
Thanks for the comparison pic!

Sadly the only holster I'd be interested in is the 1911...but my 1911 is a Taurus too haha. In what way does it not fit? I wouldn't think the dimensions would be that different from gov't model to gov't model (with the exception of rails, of course).
It's the thumb safety -- between being bigger than a regular safety and being ambi, it doesn't allow the thumb break to be snapped.
 

·
Registered
Joined
·
223 Posts
SeeMs the Tuck This II will fit a 24/7 Pro 9mm from my research. If so, I'll take it. Can PayPal tomorrow at the earliest.
 

·
Registered
Joined
·
156 Posts
Discussion Starter #13
SeeMs the Tuck This II will fit a 24/7 Pro 9mm from my research. If so, I'll take it. Can PayPal tomorrow at the earliest.
Not entirely sure. My recollection is that the 24/7 Pro is fairly close to a Glock 26 in height (bottom of trigger guard to top of the slide) and frame thickness, and the holster is too small for my G26 (my LCP and Browning BDA-380 slide right in).
 

·
Member Emeritus 1946-2018
Joined
·
35,996 Posts
Bumparino!
 
1 - 18 of 18 Posts
Top