Taurus Firearm Forum banner
1 - 1 of 1 Posts

·
Administrator
Joined
·
19,052 Posts
Probably Not, but it would not hurt to ask. Most Firearms Manufacturers Customer Service Departments will only install OEM parts. Seek the service of a Qualified Gunsmith, familiar with the design.

I installed an Enterprise Arms Ghost Ring Rear Sight originally meant for a Beretta on my PT92. As the Dovetail and Slide Design is different, it had to be shimmed in place.

Also, the Taurus Rear Sight retains the Firing Pin Lock mechanism. When the Rear Sight is drifted off of the slide, it will come shooting out and may be easily lost. (Had to replace it!) If you, or someone else, is to remove the rear sight, drift it off from left to right and remember that the last 3/8 of an inch retains the Firing Pin Lock Plunger and Spring.


1992 Vintage Taurus PT92AFS with Enterprise Arms Ghost Ring Rear Sight
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top