Taurus Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
58 Posts
With the mag out and the slide racked, if they cartridge stays in the chamber you may have a problem with your extractor. If I were you I would pry it out with a screw driver on the same side of the extractor with the slide locked to the rear but make sure you only make contact with the rim of the cartridge. I am not claiming to be an expert but that's what I would do. If you really want to be safe about it take it to a gunsmith.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top