Taurus Firearm Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
52 Posts
Discussion Starter · #1 · (Edited)
This was my second trip. The first time was just a shake down right after I bought it to make sure the gun worked. This time was to get the feel for it. For me this is the most comfortable pistol I've ever held and that proved true during shooting. The target was 21' both sessions. That first trip was pull to left and slightly down, nothing new. If you look at the picture of the target from the 2nd trip what is circled in red are the first 2 mags 24 shots with about 5 landing outside the circle closer to the bulls eye. I use the part of my finger just in front of the first joint to pull the trigger. After I tightened my grip and extended my arms slightly it made all the difference in the world. That's 4 mags 48 shots with the last mags rounds just clipping paper from the big hole. What I realized afterwards is I hadn't given the trigger a single thought, it was that smooth. This was all WWB 115gr. I hate Winchester white box it's always been ammo that has given me trouble. Well Wal-mart had it 35 bucks for 200 rounds so what the heck lets see what the G2C can do with it. It did just fine. 122 rounds of 115gr fmj all together and no problems. When I opened the box I was surprised to see nice clean shiny ammo. Maybe they got their act together. So far this is a solid performer and has a great feel to it.



Here's from today also. My CZ 455 22lr at 75' 25 shots each hole using one bag for a rest with one flyer that was my fault. They can be covered with a quarter. That CZ rife is an outstanding piece. It was a good day at the range.





 

· Registered
Joined
·
5,911 Posts
Nice shooting. Glad to see you discovered the secret to shooting this gun well. So many want to adjust the sights and make their first mistake....g good grip and technique are important to shooting the G2 pistols well. Enjoy it and may it serve you well.
 

· Registered
Joined
·
52 Posts
Discussion Starter · #6 · (Edited)
Went to the range again today. Still need to work on my grip. Used some Hornady Critical Defense HP, Federal Military/Police Practice, and the infamous Winchester White Box. Here's the results. Got some work to do. A 168 rounds through the G2C and it's eating everything no problem. The CZ has around 400 and never a failure

I can live with this.


At 30' bad grip is showing


Here's with the CZ P10C. A little better with the G2C at this distance.


Better with the CZ at 30' A few hit outside the gray but not by far.
 

· Registered
Joined
·
1,339 Posts
If you are a right hand shooter and using the standard 2 hand grip, on the upper left frame indent where your thumb rests, apply a little bit of pressure with your thumb as if you are wanting to push to the right. As you are locked on target and fire, this will help prevent any movement to the left.
 

· Registered
Joined
·
52 Posts
Discussion Starter · #10 · (Edited)
Went back to the range for the first time since installing the Lakeline striker guide. I ran 60 rounds so it's 180ish through the gun now. I can't say it's the striker guide that helped with better accuracy but the trigger is excellent on this gun and I know that helps.. It's smooth to where it starts to stage then breaks so nice. At 21' everything stayed within 6" vertical and 4" horizontal and it always takes me a couple of mags to warm up with the last 3 mags right around the big hole. The aiming point was the top of the sight on the top of the hole in the 6. I need to start covering the target. I'm still more accurate with the CZ but not by much and the Taurus is just a softer smoother shooting pistol. The CZ gets a little uncomfortable with some round rash after 75 shots. Also shot the Ruger LCR 38/+P and starting to get a handle on it. Did some +P and it's not all that much different than the 38 specials. The CZ might find itself traded in on a Ruger Mini 14

 

· Super Moderator
Joined
·
42,114 Posts
You're dialing that sucker in...nice shooting!
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top