Taurus Firearm Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
I have up for sale a 2001 model PT-111SS (1st generation) with a stainless slide. It is in very good condition with only very minor wear marks at the muzzle end of the slide from a Fobus holster. I have personally shot 50 rounds of FMJ (only 1 box) through this gun with zero FTF or FTE. I have not shot any JHP through it. The previous owner (LEO) bought it new as a back up and only qualified with it. Probably not over 200 rounds total.

I will take a picture of the actual gun tonight and post it but the pic below is almost exactly like my gun. I will also include the original plastic box, keys and brush that came with the gun.

I will gladly ship it to any FFL who is willing to accept shipments from an individual.

Asking $250 FTF in Oklahoma City or $260 shipped

PM me if you have any questions
 

·
Registered
Joined
·
136 Posts
Re: F/S Taurus PT-111 Non-Pro

Hey, I have a magazine for a PT111 ( must be non-pro.. it won't fit my PT111 Pro) that I bought from another user here.

oops.. mistaken purchase.. I'm a newbie.. guess PT111 & PT111"Pro" magazines aren't interchangeable?

I'd like to get rid of it!? 22.50 shipped USMail.

Anyone?
 

·
Administrator
Joined
·
39,376 Posts
Re: F/S Taurus PT-111 Non-Pro

Both of these posts should be in The Classifieds, but my powers are limited. :-[
 

·
Registered
Joined
·
56 Posts
Discussion Starter #4
Re: F/S Taurus PT-111 Non-Pro

Smokewagon said:
Both of these posts should be in The Classifieds, but my powers are limited. :-[
I am an idiot and posted this in the wrong forum :-[. I hope some omnipotent Administrator will come along and move it for me.
 

·
Administrator
Joined
·
39,376 Posts
Re: F/S Taurus PT-111 Non-Pro

You're not an idiot. Mistakes happen. Another mod will be along. :thumb:
 

·
Registered
Joined
·
56 Posts
Discussion Starter #6
Re: F/S Taurus PT-111 Non-Pro

Smokewagon said:
You're not an idiot. Mistakes happen. Another mod will be along. :thumb:
You're not omnipotent?
 

·
Registered
Joined
·
2,601 Posts
Re: F/S Taurus PT-111 Non-Pro

Only few mods are 'global', the rest of us only have the mod power in specific boards...I happened to have the pawa' in the Revolver board ;)
 

·
Registered
Joined
·
136 Posts
Re: F/S Taurus PT-111 Non-Pro

Smokewagon said:
Both of these posts should be in The Classifieds, but my powers are limited. :-[
Oops. I didn't even notice; I just replied. Sorry.
It was kind of a tag-along post anyway.. hope the original poster didn't mind!?
Sometimes I just don't think!
 

·
Registered
Joined
·
6,762 Posts
Re: F/S Taurus PT-111 Non-Pro

Here's a link to the Taurus USA page for anyone who's interested.
http://www.taurususa.com/products/product-details.cfm?id=21&category=Pistol


BurkC, I take it you aren't counting the JHP feeding issues you had towards the no FTF FTE totals or is this a different gun?
http://www.taurusarmed.net/forums/index.php?topic=7093.0

Here's a couple of questions.
How many magazines does the pistol come with?
Do any/all/none of them have the finger extension shown in the above link?
What is the capacity of the magazine(s)?

Tim K said:
Oops. I didn't even notice; I just replied. Sorry.
It was kind of a tag-along post anyway.. hope the original poster didn't mind!?
Sometimes I just don't think!
If BurkC doesn't have an issue with it I don't. Besides, it might help him sell his gun since there's an extra mag available. :D

Tim K, same questions as above about the mag.

Steelheart
 

·
Registered
Joined
·
56 Posts
Discussion Starter #10
Re: F/S Taurus PT-111 Non-Pro

Steelheart said:
Here's a link to the Taurus USA page for anyone who's interested.
http://www.taurususa.com/products/product-details.cfm?id=21&category=Pistol


BurkC, I take it you aren't counting the JHP feeding issues you had towards the no FTF FTE totals or is this a different gun?
http://www.taurusarmed.net/forums/index.php?topic=7093.0

Here's a couple of questions.
How many magazines does the pistol come with?
Do any/all/none of them have the finger extension shown in the above link?
What is the capacity of the magazine(s)?

If BurkC doesn't have an issue with it I don't. Besides, it might help him sell his gun since there's an extra mag available. :D

Tim K, same questions as above about the mag.

Steelheart
Thanks for reminding me. I tried a very few JHP (not sure what brand) and, as has been reported, they don't feed very well. they seem to hang up on the short ramp. As some of you have experienced, this seems to be the 1st generation.

it comes with one 10 round magazine with a finger extension.

BC
 

·
Registered
Joined
·
6,762 Posts
Re: F/S Taurus PT-111 Non-Pro

What about the magazines (number, capacity, configuration)?

Steelheart
 

·
Registered
Joined
·
6,762 Posts
Re: F/S Taurus PT-111 Non-Pro

BurkC said:
You're not omnipotent?
Gray_Wolf said:
Only few mods are 'global', the rest of us only have the mod power in specific boards...I happened to have the pawa' in the Revolver board ;)
But all mods can request assistance fire support if needed from those with global authority. :shooter:

Steelheart
 

·
Registered
Joined
·
56 Posts
Discussion Starter #13
Re: F/S Taurus PT-111 Non-Pro

Steelheart said:
What about the magazines (number, capacity, configuration)?

Steelheart
Modified response above
 

·
Registered
Joined
·
56 Posts
Discussion Starter #14
Re: F/S Taurus PT-111 Non-Pro

Gun is SOLD!

Thanks to everyone for looking.

BC
 

·
Registered
Joined
·
136 Posts
Steelheart said:
Tim K, same questions as above about the mag.

Steelheart
By the way.. the magazine -does- look like the linked picture, maybe with a more curved finger extension?
Packaging says a part # of MGTI11101Z & says "Mag Taurus 9mm M/PT111 Promo" the mag itself is marked "Taurus by Mec-Gar" & a logo for Mec-Gar, Made in Italy

I dunno... I just know I bought it & it won't fit my gun! Bummer...
Help!!?

Tim
 
1 - 15 of 15 Posts
Top