Taurus Firearm Forum banner
1 - 2 of 9 Posts

· Registered
Joined
·
7,078 Posts
Sounds like you got a good deal. It might not be a bad idea to have a smith check it over for any bushing or springs that need replacing. Also, what barrel length did you get?

I had a M13 4" for a while (same basic gun but blued). It worked decent but I never did find a set of K frame grips that felt real good to me, and I've had a couple of K frames to experiment with. It funny, the OEM grips on my Taurus M65 work just fine.

Steelheart
 

· Registered
Joined
·
7,078 Posts
That depends on how you feel about the whole full power using lighter bullet thing. There is a flat spot on the forcing cone that sometimes cracks with the 125gr loads. I haven't heard of any issues with the heavier bullets. Here's some articles with more information:
http://www.gunblast.com/Butch_SW-Model19.htm
http://www.gunblast.com/RKCampbell_SWsBest.htm

Now, I'd shoot what I wanted to and not worry about it, especailly with what you paid for it. But you may chose differently.

Steelheart
 
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top