Taurus Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
57 Posts
swak,

Disassemble: Lock the slide back and rotate the latch down. Allow the slide to come forward against the pin and then lock it back again. This should force the lever away from the frame enough to grasp it and remove it with a twisting motion.

Assemble: Lock the slide back. Tilt the muzzle downward to make sure the barrel is forward. Insert the pin slightly with the semi-circle above the spring and push in while rotating the pin. It should slip past the spring and allow you to push it all the way in.

Hope this helps. :)
 
1 - 1 of 1 Posts
Top