Taurus Firearm Forum banner
1 - 1 of 14 Posts

· Registered
82 Posts
I noticed this fairly early on after reading about someone with an ND with the safety on. I'd prefer that the safety would block the firing pin rather than simply prevent the trigger from pulling if it's in the right position, but as others mention, following the rules will keep you safe!

I've also seen mentioned that this is listed in the manual, but no one's posted what actually IS in the manual, so here goes:

"By moving the safety upward you will block the firing

Keep the safety on while not using the pistol.

WARNING: To properly apply the manual safety lever, the
trigger must be in its forward-most position, otherwise the
lever can be moved upwards, but will not be fully engaged.
Keep your finger off the trigger while moving the lever
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.