Taurus Firearm Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
Mil Pro. 3rd gen. 9mm
24 Hornady Hollowpoints clean.
out of 100 luger FMJ 12 misfires due to light primer strikes ( on SA and DA). Assuming it was light primer strikes since the bullets shot after I reloaded them. I did clean the gun before I went to the range. I bought some cleaner to spray into where the pin is and left it overnight. Today I am letting it drain. Hope this helps. Guys..!!!! i need you!!! what is going on here???????? What should I do..should I be scared??
 

· Registered
Joined
·
37 Posts
Discussion Starter · #4 ·
guy at the gun range told me to spray some special gun cleaner in where the pin is to see if this helps. and if not to send it to the manufacturer. its sounds good now. i will take it to the range soon to check it out.
 

· Premium Member
Joined
·
875 Posts
Spraying stuff into the firing pin channel may only exacerbate the problem. Try breaking down the firing pin assembly (do a search... at least I have written a "how to" on doing that). LIGHTLY lube the firing pin, letting nothing get into the the front of the main assembly on the firing pin.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top