Taurus Firearm Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
i have a 3x3 judge, every now and again while rapid firing with heavy shot loads the hammer lock engages. how do i take it out?
 

·
Premium Member
Joined
·
10,104 Posts
Contact Taurus Customer Service, They should be able to help you with this. I am pretty sure that removing the hammer lock assembly will void your Lifetime warranty.

TAURUS CS.jpg
 

·
Super Moderator
Joined
·
40,514 Posts
i have a 3x3 judge, every now and again while rapid firing with heavy shot loads the hammer lock engages. how do i take it out?
Use your key and fully engage the lock, then full disengage the lock. See if you have problems again. If not you are good to go. If you do I would suggest contacting Taurus as silverblackman suggested. Good luck and let us know the out come.
 

·
Registered
Joined
·
4,745 Posts
Likely the lock. I believe it's actuated with rapid fire (not really).
 

·
Registered
Joined
·
9,171 Posts
Sounds like the lock isn't fully disengaged, I would use the key to fully engage and then disengage the key lock. Remember, it's two quarter turns with distinct stopping points. If you can't get it to go into the hammer like it should, then call Taurus to send it back.
 
1 - 6 of 6 Posts
Top