Taurus Firearm Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
15,646 Posts
Discussion Starter #1
If I had a complete PT940 slide and magazine. Would I be able to use them with my PT911?
 

·
Administrator
Joined
·
17,694 Posts
If I had a complete PT940 slide and magazine. Would I be able to use them with my PT911?
Yes! But you will also need a PT940 Barrel and Recoil Spring. :)
 

·
Registered
Joined
·
1 Posts
PT911 slide assembly on PT957 frame

Yes! But you will also need a PT940 Barrel and Recoil Spring. :)

Have a PT957, just picked up a PT911 parts kit. Frame sizes are the same for PT911, PT940 and PT957. As with everythign there may be a slight amount of fitting for a barrel/slide combination. I'm looking to make a tri caliber frame setup with mine. Missed out on a PT940 earlier in the month.

Will let you know how mine works out. Good luck.
 

·
Registered
Joined
·
15,646 Posts
Discussion Starter #4 (Edited)
Got a PT-940 slide, barrel, guide rod, and recoil spring. Huge difference in recoil from 9mm to .40 S&W! The .40 rounds worked in the 9mm PT-911 mags.
 

·
Registered
Joined
·
10,022 Posts
You are a Real Wealth of Information here, And I for one appreciate it!!!!
Indeed the 911, 940, and 957 can all use the same frame. And also when doing the 940 on the 957 you can use the same mag and vice versa. Only the 911 needs a seperate mag for the conversion.
 

·
Registered
Joined
·
15,646 Posts
Discussion Starter #7
1 - 7 of 7 Posts
Top