Taurus Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
418 Posts
The follower should only go in one way. The springs should go in so it pushes up on the front of the follower, not the back. There should be a metal plate that goes under the spring at the bottom of the magazine with the bump on it facing down so it can lock into the magazine base plate once slide on.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top