Taurus Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
625 Posts
Have you had the opportunity to compare your gun to another one. It might give you a better idea of where the problem lies. If you have a local gun forum in Arizona, you might be able to find someone local to you that has a 3rd gen. to compare yours to. Check the spring tension between the two and see if they are similar. If not, perhaps buy a replacement spring instead of sending it to taurus, which may take a while.

From looking at your photos, it looks like the firing pin is working correctly, but the bullet isn't always seating well against the bolt face. It appears you came to the same conclusion. Are these reloads or are they factory loads? If they are reloads it's possible you got a bad batch of primers. If not, and based on the different brands you have tried, I would say you definately have a seating issue.

Todd
 
1 - 1 of 1 Posts
Top