Taurus Firearm Forum banner
1 - 1 of 17 Posts

· Registered
49 Posts
I've done a number of things I've read/seen in various places including taking the slide off and holding the frame and working the trigger many times while watching TV and taking the firing pin assembly out and cleaning (not very dirty but a little grunge in its bore I wiped out and lubricated with dry film lubricant), feels pretty good now.

A question for the more experienced: Does the firing pin block(1.14) just lift out with a pair of tweezers or is it held captive by the extractor? I thought I'd take it out and polish.
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.