Taurus Firearm Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
131 Posts
I found that using Alliant Power Pistol for my .45acp reloads works great.

For my target loads, I use 230gr FMJ/HP's (When they odn't have FMJ cheaper ;D),
and using a 5.5gr load of PP, it works great. Very clean burning powder,
nice flash ;D, and little recoil.

I have not done any REAL accuracy tests with a pistol rest, but off hand from a kneeling position,
at 10 yards I can get sub 2" groups if I do my part from my pt145.
Slightly smaller with my Charles Daly 1911 Govt model.

For a normal 230gr load I use 6.6gr of PP and it equals the remington's recoil.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top