Taurus Firearm Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Hi all I have put 100 rounds through my protector Polymer with no problem. This evening I was dry firing using snap caps. And everything was working fine til I wanted to try some single action. I can not pull the hammer back it starts and then won't complete the single action cycle the cylinder is froze. It is acting like it is out of time. Any ideas what may be causing this? Thanks for any input.:confused:
 

·
Registered
Joined
·
10 Posts
I have the .357 version and had something similar to this the second time out. I removed the grip and it appeared that residue grip material was blocking it. I cleaned it out good (both the grip and the material in the mechanism that was exposed with the grip removed) and it has worked fine ever since. Hope this helps.
 
1 - 2 of 2 Posts
Top