Taurus Firearm Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hi All

Took my new Model 651SS2 to the range this morning. And had the following happen. I could not pull the trigger the cylinder was frozen. It was as if the timing was off. Also it looks like the cylinder is touching the frame just above the triggeyoward the rear of the frame. I had a hard time getting the cylinder to release to get the rounds out. Got it cleaned and packed up teady to go. Anyone else had this problem?:(
 

·
Registered
Joined
·
1,363 Posts
Yup with a blued one. Although mine was leading. It had binding issues, however, the ejector screw had backed its way out. Yours sound like it might be head space but that is a wild guess based on the info at hand. You may want to check to see if the ejector screw came loose this will bind up the cylinder. That's usually not a Miami fix, you can fix that with a little blue lock tight.
 
1 - 2 of 2 Posts
Top