Taurus Firearm Forum banner

Need stronger hammer spring for Taurus revolver causing mis-fires

4284 Views 8 Replies 4 Participants Last post by  Tracker Backer C45
My taurus model 441 in .44 special has a wonderful double action trigger pull, but the lite spring tension is causing some mis-fires as some primers aren't getting enough indentation to ignite the powder charge.

I could try changing my brand of primers, which are presently Winchester...but I really feel that the hammer spring needs to hit harder.

Also contacted Wolff Springs.com but an email said they only make hammer springs to reduce spring tension...what's up with that???

Can anyone give me a link on stronger tension hammer spring for my gun.

Taurus won't sell me a hammer spring and I won't send them the gun to replace one.

TB C45
1 - 2 of 9 Posts
I agree with Gray I would think a seating problem. Do you use a hand primer tool or the press? Unless the firing pin got damaged .
Oh well.
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.