[Tracker Backer C45]

Is this the model #441 because it has the target sights?

And is the same gun without target sights the model #431?


Lastly, what is the model number of this 3-inch barrel Taurus SS revolver...

Thanks, TB C45

 

[85chsts]

on the taurus web site than can get model numbers and spec if you supply the serial #

 

[Tracker Backer C45]

Don't have these guns yet, only need to know their model numbers so I know what I'm talking about with a seller who don't know what he's got.

TB C45

 

[MPanova]

Send Richard a PM or ask him in a thread he should be able to tell you

 

[griton]

WB77XXX

 

[griton]

also what material is it made of?

 

[drummin_man627]

Ask you buddy to run the serial number here: http://www.taurususa.com/find-model.cfm
I should answer with the year of manufacture and the proper model number.

 

[griton]

Thanks but not listed in taurususa model id!!

 

[Robby]

When you open up the crane, cylinder, there should be at least two series of #'s. One of those is the model #. Check it out, it is there.

 

[drummin_man627]

After further research I've come to the conclusion that all of the 5 shot 38 specials seem to be in the "85" series.
I can't determine a designator for the high polish Stainless Steel in the few other models that they show with that finish.
Here's my guess. 85SS3 Series 85, Stainless Steel, 3 inch bbl
When I entered 85SS3 in the search box, I get a "Discontinued" page with no picture. http://www.taurususa.com/gun-search.cfm
.......And the mystery continues. hehe

 

[1 old 0311]

Did you look on www.gunbroker.com I use them a lot of research info.

 

[rangefinder]

I have a Model 85CHSS that looks like the photo but without the hammer spur. Shoots great. .38SPL