Taurus Firearm Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
I switched the hammer and trigger springs today using Wolff springs and now the hammer won't come back far enough to set the trigger. You can pull the trigger and make the cylinder rotate but won't cock or fire. Any ideas? Thanks
Edit: Figured it out. The Wolff trigger spring (6.5 lb.)was bottoming out. Length was .880 long. Shortened it to .800 and it works fine now.
 
1 - 3 of 3 Posts
Top