Taurus Firearm Forum banner
1 - 1 of 1 Posts

5,205 Posts
Robby said:
From the manual here is what it says.
H. If magazine becomes dirty, which usually happens after 200 shots, it
should be disassembled and thoroughly cleaned. To do so, use a punch to
press in on magazine spring plate where it protrudes into the hole in the
magazine floorplate. Slide the magazine floorplate toward the front of the
magazine, taking care to prevent the forcible ejection of the magazine spring
plate and compressed magazine spring. Withdraw magazine spring plate and
magazine spring from magazine body. Turn magazine upside down and
remove magazine follower (fig. 1).

i was going to say that.you can go on taurus site and see your manual too.if you dont have one!
For PT 24/7 .45 ACP magazine disassembly see fig. 2.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.