Taurus Firearm Forum banner

101 - 116 of 116 Posts

·
Super Moderator
Joined
·
35,518 Posts
Discussion Starter #101
If the Lee dies work, I'm all set, I have the set for 300 AAC. brass isn't a problem. my wife has a decent source. That's oddly the same cut off Jig I was looking at. and it's a mini chop saw/cut off saw from HF right?

That's the one by "Drillmaster". Not sure if the coupons work as they do post some exclusions on some coupons. IIRC my jig was somewhere around 12-15 dollars through EBay. I will deburr after cutting to length on my FA machine...I am thinking of trying to deburr in the SS wet pin tumbler.
 

·
Premium Member
Joined
·
16,956 Posts
Lets trade brass. I need .45 Colt, .357 Magnum and .450 bushmaster. I have Lots of .40.s, 9mm and .223/5.56 and some .30-06, 22-250, 7.62x30, 5.7, 308/7.62 and others.
 

·
Super Moderator
Joined
·
35,518 Posts
Discussion Starter #103
Lets trade brass. I need .45 Colt, .357 Magnum and .450 bushmaster. I have Lots of .40.s, 9mm and .223/5.56 and some .30-06, 22-250, 7.62x30, 5.7, 308/7.62 and others.
Can't help much there...I shoot and load .357 but so few that I probably have only 1000-1500 loaded and empty. I'll rustle around as I may have a few 45 Colt that I could toss a stamp on for you.

I have TONS (figuratively speaking) of 9mm cleaned and ready if anyone is starting up loading that caliber.
 
  • Like
Reactions: darbo and gbusmech

·
Registered
Joined
·
3,761 Posts
Anyone happen to have any small primer 45acp they want to get rid of? I have lots of large primer brass but I'm now down to about 700 Large Pistol Primers and no one locally has any pistol primers at all. I do have more than enough SPP to last me a long time.

Tell me what you need and I will see if I can scrounge it up from the range. Just don't ask for Grendal or Creedmore, that stuff never hits the ground.
 

·
Registered
Joined
·
2,326 Posts
I have some brass to trade but unfortunately that is exactly what I am looking for 6.5 Creedmoor. I have a lot of 40 S&W, I have some 45 Colt, 44 Magnum I would part with even though I reload those calibers, the 40 S&W I don't even own a firearm chamber in that cal. I would trade that like 10 to 1 ratio
 

·
Registered
Joined
·
4,792 Posts
I'm in need dire need of 100-200 quality US manufactured .223 brass cases. I can trade .357 brass, cash, or even a new box of .357 ammo. PM me with what you have.
 

·
Administrator
Joined
·
39,366 Posts
PM sent to Bruntson.
 
  • Like
Reactions: Bruntson

·
Super Moderator
Joined
·
35,518 Posts
Discussion Starter #110

·
Registered
Joined
·
4,792 Posts
I'm in need dire need of 100-200 quality US manufactured .223 brass cases. I can trade .357 brass, cash, or even a new box of .357 ammo. PM me with what you have.
The outpouring of offers to help me get the brass casses I need have been overwhelming. Thank you all! Konyo312 has mailed all I need. The members of our TA family are the best!
 

·
Registered
Joined
·
3,211 Posts
I'm going to toss a little different spin tonight. I have about 5 lbs of pulled/reclaimed projectiles, a good mix of cast and FMJ. I don't mold my own, but I know a few here do. I have no clue what the cash value is of scrap lead, however, I'd trade for:
-.380 projectiles
-9mm projectiles(.355 diameter)
-30-06 brass
 
  • Like
Reactions: stupimlico

·
Super Moderator
Joined
·
35,518 Posts
Discussion Starter #116
I'm on the hunt for 458 SOCOM brass. Any odd quantities that you've picked up at the range I would be interested in. We can talk trades with 5.56, 300 BLK, 45-70 Govt, 44 Magnum, 45 ACP, .380 Auto, 32 ACP, 38 Special, 357 Magnum. Shoot me a PM if you can assist. Thanks!
 
101 - 116 of 116 Posts
Top