Taurus Firearm Forum banner

Lee Powder Drum Measure

363 Views 2 Replies 3 Participants Last post by  kmw1954
Well finally ran some 223/556 through the Lee powder drum!
ran 100 rounds using BLC-2 ( 25.0 gr) and 55 grain copper FMJBT.
LOVELY!
perfect powder drops, no spillage, quick, and easy.
so that's 100% performance over the spectrum of the 6 calibers that I load.
Much improved system for me over the powder disk measure.
  • Like
Reactions: 5
1 - 3 of 3 Posts
Yep. Been using mine, and loving that it's set it and forget it. I still spot check my charges on the scale, and they are running no more than +/-.2 grains variance so far, and usually on my .380 and 9mm loads. On the larger loads, it has remained dead on.
  • Like
Reactions: 2
Excellent! I've been using mine with 3 different pistol powders and the most I've ever been off is 0.1gr but most are spot on.
  • Like
Reactions: 2
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top