Taurus Firearm Forum banner

How to dissasemble my Taurus 24/7 G2 .45

Tags
.45 24/7 taurus
1K views 7 replies 4 participants last post by  Wino 
#1 ·
I have watched many videos, but the farthest I get to is the part where I pull the slide back 1/8 and push down the disassemble tab. Everyone on the videos says to pull the trigger and the slide will come off. I have fired around 60 rounds through it, please help. thanks
 
#2 ·
Welcome from the bowels of Hellaware.. You might try posting in the proper guns area and someone will help you.. There is a section called the gun shop..Answers await you. Good luck.
 
#4 ·
You just posted on this website....
 
#8 ·
BE SURE NO AMMO IN GUN - THEN Pull slide back slightly to release pressure on slide lock; both sides of slide lock must be pulled down evenly; release slide and let it return to it's forward postion while continuing to hold down slide lock bar; then pull trigger to release slide w/slight thumb pressure on rear of slide; slide should slide right off.
 
  • Like
Reactions: k.hurrle
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top