Taurus Firearm Forum banner

Help! Need to know what's causing this...

1173 Views 4 Replies 3 Participants Last post by  pgreen7436
I just put 100 rounds of 230gr FMJRN over 5.4gr Titegroup through my brand new PT145. I noticed that the cartridges have a gouge or nick at the base on the left hand side (key of the firing pin is pointing down on the spent primer).

Here's a couple of pictures of two of them:

See less See more
1 - 1 of 5 Posts
I had a mark on these from the Hydra Shok 165 that wouldn't feed.

Was there any FTF's?
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.