Taurus Firearm Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
PRESS RELEASE FOR BUFFALO BORE 32 S&W LONG (32 Colt New Police) 115gr. LFN (Item 10A)
After countless customer requests for ammunition that will make this cartridge lethal to humans, Buffalo Bore is delivering. There are millions of small revolvers still in circulation chambered for this cartridge and if an ammo company was to make effective self-defense ammo, the little revolvers would have a meaningful purpose for personal defense against humans. Current (as of this writing in 03-2013) factory ammunition offerings include soft pure lead bullets of round nose configuration at very low velocity. Round nosed bullets do little terminal damage as they tend to slip and slide through mammalian tissues and the very low velocities don’t help much either.
In order to make this cartridge meaningful for self defense, we designed hard cast (not soft) bullets that will not deform on impact and will maintain their flat nose profile as they penetrate through muscle and bone and because of their flat nose, they crush (not slip and slide) through mammalian tissues, doing considerable damage along their path. We alloy and lube these bullets properly so they will NOT substantially lead foul any normal barrel. Then we added velocity by using modern powders that will give extra velocity and remain within the SAAMI pressure limits of 15,000 PSI. The result is a fairly lethal cartridge that brings new usefulness to millions of these old pistols. Depending on how much clothing must be penetrated and how much bone is encountered, expect 20 to 30 inches of straight line penetration in mammalian tissue with this load. This bullet is 15grs. heavier than any other commercial load we could find, yet it is going substantially faster than any (about 100 fps faster) commercial load we could find.
The use of jacketed expanding bullets in this weak cartridge would be a mistake as even if you could get a jacketed bullet to expand at these velocities, doing so would limit penetration significantly enough that the bullet would certainly under-penetrate and as a result would likely not be lethal to humans. Additionally, hard cast bullets create less friction inside the barrel than jacketed bullets and thus we are able to obtain significant velocity gains at lower pressures, than would be possible with jacketed bullets.
This ammunition is safe to use in ANY solid frame revolver that is in ordinary shooting condition. “Solid frame” means any revolver that is not a top break frame. “Ordinary shooting condition”, means ANY revolver that is in condition to fire any modern factory, 32 S&W LONG ammo, without malfunction. Have a competent gun smith check your revolver for “ordinary shooting condition” if you have doubts, as many of these revolvers are very old and some imports were made of questionable quality as manufacturing techniques and materials were not advanced ten or so decades ago. Take your gunsmith a copy of this press release so he will understand the context of your questions.
To add versatility, this ammunition can of course be fired in ANY/ALL revolvers chambered in 32 H&R Magnum and 327 Federal.
Note that we have continued our practice of using real over-the-counter revolvers to develop our published velocities of this ammunition. The duplicitous practice of using extra-long laboratory barrels to develop published velocities is deceptive to the customer. Real world users of firearms and ammunition need to know how the ammunition is performing in the real world, where it matters. Note our velocities, below.

  1. 781 fps ---- S&W model 30 Hand Ejector, 3 inch
  2. 715 fps ---- Ruger SP101 327 Federal, 3 inch
  3. 840 fps ---- S&W 1[SUP]st[/SUP] model Hand Ejector, 4 inch
  4. 821 fps ---- Ruger Single Six 32 H&R mag., 5.5 inch
  5. 754 fps ---- Ruger Black hawk 327 Federal, 5.5 Inch

I hope that this is helpful.

Scott
 

·
Super Moderator
Joined
·
40,704 Posts
Interesting!
 

·
Registered
Joined
·
3,749 Posts
What prices are they asking for their 32 Long ammunition? I load several thousand rounds a year using my cast bullets and find them totally reliable and very versatile. I like 32's; OH YEAH!!!!!!!
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #4 ·
What prices are they asking for their 32 Long ammunition? I load several thousand rounds a year using my cast bullets and find them totally reliable and very versatile. I like 32's; OH YEAH!!!!!!!
Look on BB's website. They'll give you the price for both the 115 and their 100-grain WC loaded to Max pressure levels.

There's plenty of .32 Long "goodness" to kick bootie with every pull of the trigger.

Scott
 
1 - 4 of 4 Posts
Top