[Alfonse]

I picked up our G2S this week. I did notice one big (I think) change that should apply to the G2C as well.

The trigger on the G2S isn't gritty at all like all of my other G2s have been. Taurus must have deburred the trigger bar differently than they used to. I see no reason to take it apart and smooth things up since the trigger is really smooth. The only bump in the trigger is from the hole in the striker guide, but that's another story.

Anyway, its the smoothest out of the box G2 trigger I've ever seen, and I've seen a few. I expect this is something that is common on the latest versions.

Here's the pic:

 

[Alfonse]

I'd like to know if the slide is narrower that the G2c, or the same width. If it's slimmer I can see some situations where it might be useful.

I'll measure or get a photo next time I get out, which should be in the next day or so. The G2C specifications show it to be 1.25" wide, while the G2S is 1.1". The grip is not as wide, but I will have to look at the slide.

 

[Alfonse]

That bump in the trigger--is that only in the double-action pull? Because I don't see how the hole in the striker guide would affect the single action pull.

Because the sear rotates on a pin, so as it moves the striker also moves.