Taurus Firearm Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I picked up a early model 82. I need to know how to remove the hammer spring. There are no holes in the spring shaft to insert a pin. There is a tension screw on the inner side of the grip, but by removing the screw does not release the pressure on the spring. I have a later model with a completely different type of spring (cock hammer, insert pin remove spring) but this one is different. Any help would be appreciated. Thanks, Bob
 
1 - 2 of 2 Posts
Top