Discussion Starter · #1 ·
I recently bought a used judge and while shooting today the cylinder fell out. Upon further inspection I noticed the spring and pin fell out as well so I will have to try and find parts. Since it was not in working order I decided to disassemble the gun and clean it. Before I did this the cylinder would no spin when in the closed position. Now that it is back together (minus the pin and spring to hold the yolk) it spins freely when closed. I have checked many times and can't seem to find anything missing to cause this. Could it have had a problem before and I accidently released the issure or is it supposed to stay in a fixed position. Thanks for the help in advance!