Taurus Firearm Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Put about 200 rounds through it (new) a couple of months ago. Trying to field strip the thing, and the slide will NOT come off. The takedown nubs/slides stay pushed down until the slide is moved back. Pulling trigger simply fires the striker, and doesn't cause the slide to move forward, as shown in every video I can find. I am most certainly pulling both sliders down, but the rt side one (opposite the safety) will often push into the frame, and have to be fished out with a pin. What is going on here??
Attached pics show the sliders staying "down", and pic with arrow is the side that sometimes pushes into frame.
 

Attachments

·
Registered
Joined
·
506 Posts
My slide can be removed with the mag inserted.

Fishing out the tab does not sound good. My tabs don’t drop unless I apply downward pressure on the tabs and pull the slide back slightly. Release the slide, and the tabs stay down. Then pulling the trigger releases the slide.


Sent from my iPad using Tapatalk
 
1 - 4 of 4 Posts
Top