Taurus Firearm Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
151 Posts
ESProctor1 said:
I was wondering if you were to polish the exterior of your barrel if it would make the slide smoother. Also what would be the best way to polish it really good?
I polish the crown or tip of the barrel for cosmetic reasons............if you want to smoothen the slide then you have to focus more on the rails on the slide and frame and the fitment. I use a buffing wheel and jeweler's polish to get a mirror finish on my crown.
 

· Registered
Joined
·
151 Posts
Yes, definately dont take off any meat from the crown. By using the jeweler's polish and a cotton buffing wheel then its only going to bring out the mirror look without altering anything. Its like cleaning the pain on your auto with a buffer...........the clear-coat will remain safe if you know what you are doing.
 

· Registered
Joined
·
151 Posts
I tried to take a few pictures of mine so that I can show you, but the pictures are blurred..........camera dont seem to work good at close range. You will love the new look.
I polished my entire barrel and I am 100% happy with the results............entire barrel looks like a mirror. This finish along with the stainless slide and polymer looks fantastic in my opinion............more pimped out and cool.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top