Taurus Firearm Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hey folks, what color is the factory spring? I took my grips off and saw a red/brown spring! If this is aftermarket, who made it and what poundage would it be? Also, how sketchy is taking the side plate off for a looksee?
Thank y'all from Tennessee!
 

·
Moderator
Joined
·
8,781 Posts
Here is my review of the stainless 605 which shows the factory spring in mine:
https://www.taurusarmed.net/forums/...inless-review-workhorse-boudoir-revolver.html
Taking off the side plate is not that bad. You will probably spend more effort getting the grip pin out if you have one of the newer 605's with the Taurus hard rubber boot grip. Just take your time taking the side plate screws out, use the correct sized screwdriver and don;t bugger up the screw heads. I assume you are asking because you are thinking about a spring job to lighten trigger pull?

Here is an ebay link for the wolff kit. https://www.ebay.com/itm/Wolff-Redu...hash=item4b65825c1e:m:mo0Rj3JoDP_u7toxf1O9LRw
 
1 - 2 of 2 Posts
Top