Taurus Firearm Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
265 Posts
I had the same problem but mine was do to me not puting the "breakdown" pin back in the barrel when reassembly and the firing pin hiting it on the 11 o'clock position but that was just the first time i field stripped it and not knowing the correct procedure i would not really worry about it but if you are uncomfortable with it take it to a gunsmith it is a easy to problem
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top