Taurus Firearm Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter · #1 ·
Well I just got the 22 kit. The slide doesnt seem to be moving that well on the frame. Does it just simply need to break in and is this normal with new slides. Sometimes it will slide nicely on the frame but it does get stuck at certain points. Is this normal.
Thanks
 

·
Premium Member
Joined
·
785 Posts
Given the fact that the slide was not mated to the frame, you have to figure that you will have some "break in" with the new slide. Is the sticking you are refering to the product of shooting the gun, or just hand movement of the slide? You are more likely the add torque to the slide on the frame rails when you hand cycle the slide... put a 250 pack of good .22's down the barrel... check and see what to feed it and then just shoot it and see what it feels like!
 

·
Registered
Joined
·
259 Posts
Discussion Starter · #4 ·
I went with the Ciener kit.
 
1 - 4 of 4 Posts
Top