Taurus Firearm Forum banner
spring
1-8 of 9 Results
  1. Smithing
    Hey guys, I have a PT92 AFS with the safety and decocker. My issue is that my safety disengages very easily just a few ounces of pressure will disengage it. The issue is only when disengaging. While engaged, it seems to require the appropriate amount of force to decock or place into safe...
  2. Taurus Product Problems
    Last week, after my approximately 1400th round, through my .40 caliber 24/7 G2 full-size, my trigger safety spring sheared off on one end. I contacted Taurus, and was told they wouldn't sell me the part, but would repair the weapon free of charge. I really didn't want to go through the hassle of...
  3. 24/7 Series
    Hi everyone, I am in the process of tuning my 24/7 G2 fire control for competition and have to say I am amazed at how Taurus managed to fit all the features they did into a DA/SA striker... that being said, it's terrible. In any case, I finally worked through all the grinding and polishing to...
  4. Taurus Product Problems
    I'm working with a friend (via phone calls) on a PT 145. It's a Millennium (I think it's an earlier generation). The pistol's slide was completely disassembled and now there's a spring missing, however we can't find any information about the spring or the parts is related to (all models...
  5. PT92, TX 22 & Other Taurus Pistols
    PT22 Hammer Assembly I have researched the forum and could not find the information I need. Recently purchased a PT22. Love the gun, at first. Then it started having several issues with jams, FTF, ejecting, light hits. After much reading, I agree the gun likes to be clean and use CCI. I...
  6. Smithing
    I just recently got my first Taurus, model 66-B4, from my buddy, when I got it it was completely locked up and after cleaning it spins freely, too freely. The cylinder will not stay in position and can spin when the cylinder is closed. I believe it is missing a spring that would go into a hole...
  7. 24/7 Series
    I've just purchased a 24/7 G2 Compact in .40 S&W, and put about 150 rounds through it over the course of two range trips. When I stripped it down to clean it the first time, I discovered that the main spring had slipped off the barrel, and was now only braced against the front if the frame. When...
  8. Taurus Revolvers
    Today I decided to replace the springs on a new 605 Protector Poly won at a Friends of NRA banquet. It was fired 5 times prior to being cracked open. After searching here for instructions and finding none I'll offer this little writeup. Tip #1: Do NOT remove the trigger and cylinder stop...
1-8 of 9 Results
Top