Taurus Firearm Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. The G-men: G2, G3, and Millennium Pistols
    I've seen a few posts confirming fitment, performance and (some) reliability when combining the G3c Toro slide with the G2c frame. I'm curious if anyone has tried matching the G3/G3xl Toro slide with the G2c? 🤔 If so, how's the reliability?
  2. The G-men: G2, G3, and Millennium Pistols
    Everyone likes a magwell for that custom look and speedy mag reloads right? Well I can’t be the only one who wants one of these even though it’s not a race gun. They only produce them in the Philippines for the taurus G3, G3c, G2c, etc. I know myself and a lot of others have been asking and...
  3. Factory Loads
    I have a small batch of Remington UMC 115GR. I shot this batch years ago with a Gen1 mill pro and dont recall any major failures/issues. Replaced the G1 with the G2C. Took it to the range and kept getting FTF. Bought a box of Fiocchi 124GR at the range and it greatly reduced the failures...
  4. nvm

    PT92s, & Other Taurus Pistols
    nvm
  5. New Member Introductions & Site Guidelines & Rules
    Hey I'm a new handgun owner and came here seeking advice on the problem w my g2c recoil spring assembly. Check my other post if you have any ideas. Thanks
  6. The G-men: G2, G3, and Millennium Pistols
    Hey this is my first post on this site. I have about 600 rounds through my G2c and had no problems. Yesterday at the range I noticed my RSA was sticking out a bit from the frame. It was about a quarter inch past the end of the barrel. It shot fine with no malfunction. I went home and messed with...
  7. The G-men: G2, G3, and Millennium Pistols
    My gf just bought a G2C as her first pistol, she's been shooting since she was a kid just never bought anything herself, so this has really put a damper on her first purchase :( First off I do plan to contact Taurus and get this reworked by them as this was literally just bought 4 days ago...
  8. Taurus Product Problems
    Several years ago, I bought a Taurus .40 from my local Cabela's. The model number engraved on it is 24/7 G2C. I like it but have not been able to find magazines for it. I have contacted Taurus, Cabela's and several vendors without finding any. I joined this site in the hope that someone here...
  9. The G-men: G2, G3, and Millennium Pistols
    Hello fellow enthusiasts. This is my first post from the midwest. I have a G2C in 9mm equipped with an Armalaser GTO/FLX site on the front rail. I'm looking for a holster to accommodate it. I generally prefer OWB and leather, but I haven't had luck finding ANYTHING that will fix this combo...
  10. The G-men: G2, G3, and Millennium Pistols
    Got a new G2c and hadnt broke it in. Went to the range today. Did not clean the weapon prior to shooting. Shot it straight from the factory. I couldnt even get two or thee shots off without a jam or failure to feed. I hadnt shot in a while, but figured it wasnt limp wrist. I know it needs...
  11. Taurus Product Problems
    I'll upload photos showing the current out of battery condition of this new G2c. Purchased December 2020 but due to the ammo shortage it has only been to the range twice with no prior issues with fed or ejection. GENERAL BACKGROUND This is my 3rd G2c and my fifth Taurus firearm. I've been...
  12. The G-men: G2, G3, and Millennium Pistols
    Greetings, I would be happy if someone provide me with a 3d model of Taurus G2C (there is no need for inner parts, just extern surface for holster mold) thank you
    g2c
  13. New Member Introductions & Site Guidelines & Rules
    Hey guys! New here wanted to post and say hello 👊🏼 Glad to be part of the family. Recently picked up A G2c. So far about 300 rounds through it, zero issues. Loving it.
    g2c
  14. The G-men: G2, G3, and Millennium Pistols
    Would anyone know if the Ameriglo night sight set item # 322-0005-00 from the taurus online store are the same height as stock for a Taurus G2C?? Hope everyone has a safe and Happy Thanksgiving! Tom
  15. The G-men: G2, G3, and Millennium Pistols
    I have seen a couple of posts here about converting the PT111 from SA/DA to DAO, but they are quite old, and the pictures have disappeared. Has anyone done this with a G2C, and if so, are you happy with the conversion? Is the pistol still as reliable as before? Which exact part(s) did you...
  16. The G-men: G2, G3, and Millennium Pistols
    Mine are so shallow as to appear etched on with a very light pencil. When I look at the muzzle end in an advertisement the rifling appears to be definitely cut into the barrel. I haven't shot it yet. Just curious.
  17. The G-men: G2, G3, and Millennium Pistols
    We just purchased a G2C, that is not a millenium, I have ordered 2 different sights from Truglo that were not the correct ones as they were for the millenium Anyone put on night sights that are also good for day? I cannot seem to find what I am looking for. Would like the rear sight to be...
    g2c
  18. Taurus Product Problems
    Just got this as my first gun and an issue right out of box. I loaded an empty magizine and released it and the magazine release button and pin fell out. I was able to reassemble that after watching a video. Seems to be working now but don't know if it will happen again Also, the model number on...
  19. The G-men: G2, G3, and Millennium Pistols
    Good morning, I'm new to this forum, so I may be posting in the wrong section, and if so being redirected would be helpful. I purchased a Taurus G2c 9mm at the end of last year, and I am looking to find a holster that fits this gun, while it has the laser attached. The laser is a Viridian...
  20. New Member Introductions & Site Guidelines & Rules
    I currently own 2 Taurus Handguns. 1. Taurus 327 Federal Magnum Snub Nose Revolver. Same size as the 85 but it hold 6 round. 2. G2C which might be my biggest mistake ever. Really wanted to like this gun due to it's size & capacity, but the Damn thing Shoots 8 to 10 inches low @ 10 yard and there...
1-20 of 24 Results
Top