LinkBack URL
About LinkBacks
Reply With QuoteWelcomr from NE Ohio. I don't own a 609, but I bet the 609 people will chime in.
Results 1 to 10 of 20
Thread: Problems with taurus pt609 pro
-
03-24-2011, 01:06 PM #1Junior Member
- Member #
- 18801
- Join Date
- Mar 2011
- Posts
- 1
- Liked
- 0 times
Problems with taurus pt609 pro
Hello everyone!!
Having troubles with my pt609, Ive owned several taurus guns and have never had issues. But with this one every time I load a mag and then shoot till empty, it locks open on last round! If I chamber that round and shoot it, then it will not lock open after firing?
Just wondering if anyone had any suggestions??
Thanks in advance for all advice,
deeshooter -
03-24-2011, 01:28 PM #2Senior Member
- Member #
- 13585
- Join Date
- May 2010
- Location
- NE, Ohio
- Posts
- 2,125
- Liked
- 107 times
Re: Problems with taurus pt609 pro
-
03-24-2011, 01:29 PM #3Junior Member
- Member #
- 18644
- Join Date
- Mar 2011
- Location
- over here, over there
- Posts
- 24
- Liked
- 0 times
Re: Problems with taurus pt609 pro
welcome from nw ohio............ check the complaints or the smithing section. lots of good people here who have helped me out greatly
Zero tolerance for shiftless lay abouts -
Sponsored Links Remove Advertisements
-
03-24-2011, 01:52 PM #4Senior Member
- Member #
- 147
- Join Date
- Jan 2007
- Location
- Largo Fl
- Posts
- 4,084
- Liked
- 1197 times
Re: Problems with taurus pt609 pro
Welcome aboard from Tampa Bay. I'll bet you like it here.
As far as your problem, I'll start with the most common problem with new Taurus pistols. They are gunked up at the factory for storage and shipping. Ensure that you clear out all of that stuff. There may also be a metal shaving hung-up under or behind something. Many suggest C.L.P. and a good dose of air from a compressor to blow them clean. Check with the guys in the Millennium (Pro) Pistols section for more help. Also check as previously recommended, in the Smithing section.PT-92
PT-908
M-96
M-605 -
03-24-2011, 03:08 PM #5Senior Member
- Member #
- 14722
- Join Date
- Jul 2010
- Location
- central Ohio
- Posts
- 1,203
- Liked
- 3 times
Re: Problems with taurus pt609 pro
Sorry, can't help but wanted to welcome you to the site anyway.
I can't go to work today,the voices said "Stay home and clean the guns"! -
03-24-2011, 03:59 PM #6Super Moderator
- Member #
- 18139
- Join Date
- Feb 2011
- Location
- Florida Keys
- Posts
- 39,377
- Liked
- 46628 times
Re: Problems with taurus pt609 pro
Welcome from the Florida Keys!
A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed.
The 2nd amendment is not about hunting or shooting sports, it is about the citizens of this country having the means to protect themselves and the states from the tyranny, oppression, and misery of an over powering government. Modern rifles are a means for the citizens to stand up to an over powering government.
Taurusarmed.net Where are you map? -
03-24-2011, 05:18 PM #7Moderator Emeritus
- Member #
- 1686
- Join Date
- Nov 2007
- Location
- Kentucky
- Posts
- 15,932
- Liked
- 956 times
Re: Problems with taurus pt609 pro
Welcome from the KY, Horse Country!! Problems are best posted in smithing and for yours Mil Pro section.
Be sure to check out the FAQ, and Sticky's in each section!!! -
03-24-2011, 07:32 PM #8Administrator
- Member #
- 847
- Join Date
- Jun 2007
- Location
- The Giant Side of Texas
- Posts
- 37,106
- Liked
- 33563 times
Re: Problems with taurus pt609 pro
Welcome from West Texas!
All you need for happiness is a good gun, a good horse, and a good wife.
Texas friendly, spoken here.
-
03-24-2011, 09:14 PM #9Senior Member
- Member #
- 4032
- Join Date
- Aug 2008
- Location
- Jacksonville, FL
- Posts
- 34,138
- Liked
- 33303 times
Re: Problems with taurus pt609 pro
Welcome to the forum from Jacksonville, FL!
There is nothing in life so bad or so awful that it cannot be made infinitely worse by a lawyer. -
07-20-2011, 05:34 PM #10Junior Member
- Member #
- 20749
- Join Date
- Jul 2011
- Posts
- 1
- Liked
- 0 times
I own a PT 609 pro, when a mag is emptied the slide will always remain open for the next mag. It describes this in the owners manual.I love it.
Home | Forum | Active Topics | What's New | Subscribed Threads | My Threads | My Posts
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Search tags for this page
pt609
,taurus 609 pro review
,taurus 609 review
,taurus pt 609
,taurus pt 609 pro
,taurus pt 609 pro magazine
,taurus pt 609 pro price
,taurus pt 609 pro review
,taurus pt609
,taurus pt609 pro
Click on a term to search for related topics.
