Taurus pt 24/7 pro 9mm decocker
Results 1 to 7 of 7
Like Tree3Likes
  • 2 Post By Chuckstar
  • 1 Post By silverstring

Thread: Taurus pt 24/7 pro 9mm decocker

  1. #1
    Junior Member
    Member #
    77533
    Join Date
    Dec 2019
    Posts
    1
    Liked
    2 times

    Taurus pt 24/7 pro 9mm decocker

    I have a problem with firing my taurus or arming it after using the decocker
    silverstring and kruizer like this.

  2. #2
    Administrator

    Member #
    847
    Join Date
    Jun 2007
    Location
    The Giant Side of Texas
    Posts
    38,407
    Liked
    35037 times
    A little more detail might be helpful.

    Welcome to the forum by the way.
    ​All you need for happiness is a good gun, a good horse, and a good wife.

    Texas friendly, spoken here.





  3. #3
    Moderator

    Member #
    37162
    Join Date
    Jul 2013
    Location
    Country Living in NW Arkansas
    Posts
    7,940
    Liked
    12136 times
    Welcome aboard. So after decocking the pistol you are having some issues. Lets dig into this a little:
    1. After decocking - can you pull the trigger all the way back until the hammer drops?
    2. Can you rack the slide?
    3. Are your problems with firing the pistol after decocking or having other issues like. Magazine not staying seated, reassembling after cleaning, Decocker not acting correctly? We will need more info to help you diagnose the issue.
    loudviking likes this.
    BE YOURSELF - EVERYONE ELSE IS TAKEN



  4. Remove Advertisements
    TaurusArmed.net
    Advertisements
     

  5. #4
    Senior Member
    Member #
    38252
    Join Date
    Sep 2013
    Location
    North central Oklahoma
    Posts
    6,782
    Liked
    2420 times
    Welcome to the forum from Northern Oklahoma.

    Have you solved the problem, if so what was the resolution?
    Adam blamed Eve, Eve blamed the snake, The snake didn't have a leg to stand on.

    Opportunity may knock ounce, but temptation leans on the doorbell.

  6. #5
    Senior Member
    Member #
    26855
    Join Date
    May 2012
    Posts
    1,214
    Liked
    527 times
    Decocker is not tied to sights That I know of...Aiming is a user issue NOW that we dismissed that myth of decocker throwing off aim lets get to Firing trigger not cycling, striker not striking? what is the exactlies of the issue are you by chance Leaving safety in the ON position? Photo might aide our corrections. I can make a plethora of GUESSES some are user error which is common I have made same mistakes then Mechanical IE Trigger should not be manipulated while decocking or setting safety BOTH mechanical and User 99% User Error 1% because the mechanical failure decocker/safeties/Trigger bar/springs are NOT designed with those stresses in mind. So more information could help us wade through and get you back on track
    Taurus is as any other if I maintain Taurus My Taurus will take care of me

  7. #6
    Senior Member
    Member #
    12955
    Join Date
    Mar 2010
    Location
    out of my mind
    Posts
    2,515
    Liked
    3264 times
    Is it the first shot after the decocker? If it is, you are sort of in a double action mode for that first shot. You are using the trigger to recock the striker and unless you've practiced double action shooting, you will have a problem with the first shot.

    Maloy

  8. #7
    Senior Member
    Member #
    22430
    Join Date
    Nov 2011
    Location
    Houston, TX
    Posts
    1,495
    Liked
    1184 times
    I didn't know that Taurus made any pistols with decockers other than the PT-92s.
    "Freedom is not free. Free men are not equal. Equal men are not free. But we all know that, don’t we?" -- Jerry Pournelle

 

 

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •