Nice group of firearms.
Type: Posts; User: paulrabe78
Nice group of firearms.
This stuff shoots pretty well in my Mosin and the brass seems to be pretty good too.
I use Remington 9 1/2 now but I will use 9 1/2 Magnums when I run out of the standards. Here is some data 310_2
I bought 1000 pcs. of 5.56X45 grade 3 brass from Midway so I am working on sizing and prepping them. These will be loaded with a 50 grain Z-max bullet over 25.0 grains of H322 with a Remington 7 1/2...
I agree 100%. Guys have been shooting single shot 50 BMG uppers on AR lowers for years.
The rear sight slides right in but the front required a little fitting. Here are some pictures.
These have a blemish but the price is hard to beat. Adams Arms Base Piston Carbine 556NATO 16" BLK 6-POS Blem $599.00 SHIPS FREE
....or clean the bore on a Mosin Nagant that has seen heavy use and very little cleaning.
Just for giggles last night I took the sights off my 1911. I put my Williams Fire Sights on it from my 24/7 Pro. They fit! I went to Williams website today and they list a set specifically for the...
Here are some mags that I modified for my 840C. They will still work for my OSS too. The 840 mag is on the left and 24/7 mags to the right.
I went shooting again and had the same issue with the pin again. I just cleaned it up and put some locktite on the pin. I hope it holds.
I paid $299 + $20 shipping a couple months ago for my used/unfired 840C. So the one you are looking at is right in the ballpark.
Great post! I wanted extra mags for my 840C but couldn't find any 11 rounders. I modified my OSS mags in a similar fashion as you did and they stick out the bottom kinda funny. Oh well, I knew...
All my guns are stored with the actions closed. Some are loaded most are not. Most are locked in safes.
That is what I had to do too. It will still get me from time to time, usually on the first shot of the day.
It is back on. Taurus PT 24/7 .40 CAL. 15 Rd. : Pistol Magazines & Pistol Clips at GunBroker.com
For the low, low price of $17.95 it could be yours.
Taurus PT 24/7 .40 CAL. 15 Rd. : Pistol Magazines & Pistol Clips at GunBroker.com
I would buy it but I a few extra laying around.
So I think I need a .357 Magnum. What I am wondering is are there any that have a shorter cylinder than others? I know that in .44 Magnum the Tracker has a shorter cylinder than the Raging Bull, ...
With handgun loads I find a load that functions in my gun. I generally pick somewhere in the middle of the supplied load data. If the range is 4.5-5.0 grains of powder I will start at 4.6-4.7. I...
This is what I use. Hornady Primer Pocket Reamer Package I chuck it up in my cordless drill and it takes a second or two and the crimp is gone. I do this to all my rifle brass and any pistol brass...
48-.380ACPs 100 Berrys over 3.4 gr. Universal
38-9mms 115 Berrys over 4.7 gr. Universal
16-45ACPs 230Xtremes over 6.9gr. Power Pistol
148-.40S&W 165 gr. Berrys over 5.4 gr. Universal
I primed about 400 pistol cases today with the Lee XR. I wear a mechanic glove on my right hand, the one with the priming tool. No problems. I have done over 1000 in one day and it has never been...
I went to the range Wednesday and shot another 140 rounds through the 840 C. My hammer support pin worked it way out to the left side of the gun. This happened on my first time out with it too. It...