Taurus Firearm Forum banner

I'm getting pretty good

2K views 13 replies 11 participants last post by  GreenWolf70 
#1 ·
Just pumped out a few hundred .380's. I actually detected about ten 9mm cases by FEEL, when I was taking them out of the coffee container with my left hand.
 
#8 ·
What model .380 are you reloading for? Are you using cast lead, plated, or FMJ? Any feeding issues?

I am now collecting brass for .380, will be starting to reload practice rounds for it soon. I think my first 300 rounds will be factory FMJ rounds to help with the break in.
 
#12 ·
Bullseye. I lost the paper where I wrote down the weight, but on the Lee Auto Disk powder measure, it is cavity # 30

Once I find a load that works well, I just leave it set up and never touch it again. I have an Auto Disk for each caliber that I load

Sorry for my shoddy record-keeping, but I hope that was helpful
 
#14 ·
Midway also has one of those grated bowls to sort .380 auto from 9mm.

I picked up about 500 of Hornady's .355" 90 grain XTP cheap in Midway's blemished bullet sale a while back and I'm still working up loads in AA #5 and Power Pistol.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top