Page 1 of 5 123 ... LastLast
Results 1 to 10 of 49
Like Tree3Likes

Thread: PT 809 Holsters

  1. #1
    Senior Member
    Member #
    4859
    Join Date
    Nov 2008
    Posts
    334
    Liked
    7 times

    PT 809 Holsters

    I am considering purchasing a PT 809 compact for carry, but am concerned about what I perceive to be a lack of holsters made for this gun. If you go to the web sites for the more popular holster makers, where you would expect to see the 809 listed as a gun for which they make their holsters, surprisingly it is not listed.

    Most of the other Taurus models are listed, including the 24/7. I have heard that the 809 will fit holsters made for the 24/7. Is this correct, and is it also true for the compact models?

    Thanks.

  2. #2
    Junior Member
    Member #
    20972
    Join Date
    Aug 2011
    Location
    Raleigh, NC
    Posts
    2
    Liked
    0 times
    I just picked up a pt840 (full-size) today. Very sweet and got a good deal brand new. I have done some looking into them and tons of research before a purchased. I have found guys online talking about glock holsters by fobus fitting these firearms, but I have not been able to confirm. Also read on another forum that someone had an 845 and purchased a holster just for it off line. When it arrived, the package was marked Beretta Px4 but it fit his gun nicely. Hopefully tomorrow I will find time to visit a few local gun shops to see if these hold true...
    Last edited by jah0721; 08-06-2011 at 09:03 PM.

  3. #3
    Senior Member
    Member #
    4859
    Join Date
    Nov 2008
    Posts
    334
    Liked
    7 times
    Come on folks, someone should be able to give me an answer.

  4. #4
    Senior Member
    Member #
    20319
    Join Date
    Jun 2011
    Location
    Labelle, Tx.
    Posts
    120
    Liked
    65 times
    I sent an email to Theisholster.com asking if they had one for the 809. This is the response I got..."I am trying to locate a mold, if I can't find one and I get a few request for this holster I will buy the gun to make the holsters with." So, let's send the man a few requests.

  5. #5
    Senior Member
    Member #
    4859
    Join Date
    Nov 2008
    Posts
    334
    Liked
    7 times
    Quote Originally Posted by Txfire809 View Post
    I sent an email to Theisholster.com asking if they had one for the 809. This is the response I got..."I am trying to locate a mold, if I can't find one and I get a few request for this holster I will buy the gun to make the holsters with." So, let's send the man a few requests.
    Will do. Thanks.

  6. #6
    Junior Member
    Member #
    20972
    Join Date
    Aug 2011
    Location
    Raleigh, NC
    Posts
    2
    Liked
    0 times
    I couldn't find a fobus local to me, I picked up a leather holster for a glock and it fits I just dont like the soft nylon/leather holsters. But I have read in numerous places that the blackhawk PT 24/7 holster will fit this gun very well (since that is the one it is modeled after). Ill be ordering one in the coming weeks.
    Taurus PT 140 Millennium (Non Pro)
    Taurus PT 840
    Remington 1100 12 Ga 2 3/4"
    Remington 742 Woodsmaster 30-06 w/Redfield 3x9-40
    Mauser 98 Custom .243 Win w/ Bushnell 4x12-40
    1903-A3 Springfield Sporterized .30-06
    Project Mauser 98 Custom .35 Whelen w/ Zeiss 3-9x40

  7. #7
    Senior Member
    Member #
    17080
    Join Date
    Jan 2011
    Location
    Indian Trail, NC
    Posts
    141
    Liked
    9 times
    S&W M&P Pro 9 (IDPA)
    S&W M&P9 (Home Defense)
    S&W M&P9c (CCW)
    S&W 22A (Plinking)
    CMMG M4LE 5.56/22

    Gone but not forgotten - Taurus PT92, Taurus PT809, Glock19

  8. #8

  9. #9
    Senior Member
    Member #
    4859
    Join Date
    Nov 2008
    Posts
    334
    Liked
    7 times
    Thanks for the information about the IMI retenttion holsters. I have one for my 24/7 and find that it does not hold the gun close enough to the body for concealed carry, and I don't care for the retention system in a carry holster.

    Thanks, anyway for the posts.
    MikeMeaux likes this.

  10. #10
    Supporting Vendor

    Member #
    3796
    Join Date
    Jul 2008
    Location
    Conway,Arkansas
    Posts
    111
    Liked
    57 times
    Quote Originally Posted by Txfire809 View Post
    I sent an email to Theisholster.com asking if they had one for the 809. This is the response I got..."I am trying to locate a mold, if I can't find one and I get a few request for this holster I will buy the gun to make the holsters with." So, let's send the man a few requests.
    if there are 3 to 4 of you guys wanting a holster I will go ahead and order the gun so I can make them

 

 
Page 1 of 5 123 ... LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Theis Holsters - Custom Made Concealed Carry Holsters
    By TheisHolsters in forum Sponsor Specials
    Replies: 22
    Last Post: 05-08-2013, 09:03 AM
  2. JPB Holsters
    By cwfunrider in forum Millennium (Pro) Pistols
    Replies: 2
    Last Post: 10-19-2010, 08:37 PM
  3. Holsters for CC
    By whslngwings in forum Concealed & Open Carry
    Replies: 12
    Last Post: 08-18-2010, 01:06 PM
  4. Holsters That Aren't Holsters
    By Smokewagon in forum Concealed & Open Carry
    Replies: 18
    Last Post: 05-20-2009, 06:46 PM

Search tags for this page

holster for taurus 809
,

holster for taurus pt 809

,
holster for taurus pt809
,
pt809 holster
,
taurus 809 9mm holster
,

taurus 809 holster

,
taurus 809 holsters
,

taurus pt 809 holster

,

taurus pt809 holster

,
taurus pt809 holsters
Click on a term to search for related topics.