Results 1 to 8 of 8
  1. #1
    Supporting Member

    Member #
    20361
    Join Date
    Jun 2011
    Location
    Coastal South Carolina
    Posts
    11,415
    Liked
    9199 times

    Savage 64F Disassembly for barrel cleaning

    The manual that comes with the rifle is sorely lacking as far as pics and instructions.
    So here is how to do it. May also work with the wood stock.
    1. Make sure the rifle is EMPTY!
    2. Make sure the rifle is EMPTY!
    3. Safety 3rd.! Make SURE the rifle is EMPTY!!!
    4. Put the bolt forward (closed chamber).
    5. Move the safety to the Fire position and pull the trigger to disengage the sear.
    6. Pull the bolt back and lock it open.
    7. Remove the 1 or 2 stock assembly screws with a 5/32" Hex Wrench and separate the action from the stock.

    Name:  Savage 64F Disassembly 001.jpg
Views: 3457
Size:  128.0 KB

    8. Remove the magazine housing screws. You need a Phillips and Flat blade screwdriver.

    Name:  Savage 64F Disassembly 002.jpg
Views: 1060
Size:  118.5 KB

    9. Remove the front stud and barrel clamp. You need a 7/16" wrench.
    10. Gently pull the barrel forward, you may to give it a slight twist.

    Name:  Savage 64F Disassembly 003.jpg
Views: 1480
Size:  117.6 KB

    11. Unlock the bolt and slowly slide it forward, remove the cocking handle (pulls out).

    Name:  Savage 64F Disassembly 004.jpg
Views: 893
Size:  121.6 KB

    12. Slide the bolt assembly forward and out.

    Name:  Savage 64F Disassembly 005.jpg
Views: 1277
Size:  121.6 KB

    13. DO NOT DISASSEMBLE THE BOLT ASSEMBLY.
    14. Clean the barrel and parts.
    14a. Remove the trigger assembly screw and clean the trigger assembly. (I was hesitant to do it as there was no good picture, thought maybe it would all fall apart)
    15. Reassemble in the opposite order.

    Hope this helps anybody with the same rifle.
    Last edited by gwk1951; 11-17-2011 at 06:37 PM.
    USAF Veteran '72-'80 SSGT, Texas Air National Guard '83-'84 SSGT., Amateur Radio Operator WA1UFE since 1974,NRA Member
    24/7 Pro LS DS 9mm 17+1,DPMS Sportical 5.56/.223 16" barrel 1:9 twist, Nikon P-223 4-12X 40mm. Scope
    Stevens Arms Westpoint Model 121 .22S,L,LR SS Bolt Action
    Mosin Nagant 1942 KO-91/30 7.62X54R, Slavia Model 618 .177 pellet SS break barrel



    "If you know how much ammo you have, you don't have enough"

  2. #2
    Administrator

    Member #
    2203
    Join Date
    Jan 2008
    Location
    Dallas, Texas
    Posts
    23,118
    Liked
    8825 times
    Here is a Youtube video I had saved for the occasion.....I like it because there is no color commentary, just a guy disassembling the rifle.

    Savage Arms Model 64 .22 LR Disassembly - YouTube


    That is a good how-to you've assembled as well. Good job !
    You all may go to hell, and I will go to Texas - Davy Crockett


    When Leonidas was preparing to make his stand, a Persian envoy arrived. The envoy explained to Leonidas the futility of trying to resist the advance of the huge Persian army and demanded that the Spartans lay down their arms. Leonidas told Xerxes "MOLON LABE", or "Come And Get Them."

    NRA member and proud Texas CHL holder

  3. #3
    Supporting Member

    Member #
    20361
    Join Date
    Jun 2011
    Location
    Coastal South Carolina
    Posts
    11,415
    Liked
    9199 times
    Watched the video. Wood stock is slightly different on the screws.
    Why he took the bolt assembly apart I don't know, the manual says don't.
    Maybe he's a gunsmith?
    Anyway, interesting. Guess I'm good for another 500 rounds before cleaning again.
    Thanks for the link.
    USAF Veteran '72-'80 SSGT, Texas Air National Guard '83-'84 SSGT., Amateur Radio Operator WA1UFE since 1974,NRA Member
    24/7 Pro LS DS 9mm 17+1,DPMS Sportical 5.56/.223 16" barrel 1:9 twist, Nikon P-223 4-12X 40mm. Scope
    Stevens Arms Westpoint Model 121 .22S,L,LR SS Bolt Action
    Mosin Nagant 1942 KO-91/30 7.62X54R, Slavia Model 618 .177 pellet SS break barrel



    "If you know how much ammo you have, you don't have enough"

  4. #4
    Senior Member
    Member #
    16202
    Join Date
    Nov 2010
    Location
    great commonwealth of kentucky
    Posts
    7,333
    Liked
    2769 times
    I usually take my bolt assy apart around every 1000 rounds. You wouldnt believe how dirty it gets in there. If you do, just pay attention. Its actually not to difficult.
    ‘‘It is not the function of our government to keep the citizen from falling into error; it is the function of the citizen to keep the government from falling into error.’’ - Justice Robert H. Jackson


    I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
    Albert Einstein

  5. #5
    Supporting Member

    Member #
    20361
    Join Date
    Jun 2011
    Location
    Coastal South Carolina
    Posts
    11,415
    Liked
    9199 times
    Quote Originally Posted by ccviper View Post
    I usually take my bolt assy apart around every 1000 rounds. You wouldnt believe how dirty it gets in there. If you do, just pay attention. Its actually not to difficult.
    Did not want to risk it yet.
    What I did was to soak it in a glass full of 90% IPA for awhile and used a nylon brush to scrub it every few minutes.
    When the alcohol quit running dirty off of it I figured it was clean.
    Gave it a light coat of RemOil and reassembled the rifle.
    I did the same to the trigger assembly.
    Maybe I'll try it after the next 500 rounds.
    USAF Veteran '72-'80 SSGT, Texas Air National Guard '83-'84 SSGT., Amateur Radio Operator WA1UFE since 1974,NRA Member
    24/7 Pro LS DS 9mm 17+1,DPMS Sportical 5.56/.223 16" barrel 1:9 twist, Nikon P-223 4-12X 40mm. Scope
    Stevens Arms Westpoint Model 121 .22S,L,LR SS Bolt Action
    Mosin Nagant 1942 KO-91/30 7.62X54R, Slavia Model 618 .177 pellet SS break barrel



    "If you know how much ammo you have, you don't have enough"

  6. #6
    Supporting Member

    Member #
    4403
    Join Date
    Sep 2008
    Location
    Galveston Bay is an Hour Away ©
    Posts
    11,504
    Liked
    3278 times
    IPA? India Pale Ale?


    NRA Life Member - TSRA Member

  7. #7
    Administrator

    Member #
    2203
    Join Date
    Jan 2008
    Location
    Dallas, Texas
    Posts
    23,118
    Liked
    8825 times
    I think that means Isoprophyl Alchohol.
    You all may go to hell, and I will go to Texas - Davy Crockett


    When Leonidas was preparing to make his stand, a Persian envoy arrived. The envoy explained to Leonidas the futility of trying to resist the advance of the huge Persian army and demanded that the Spartans lay down their arms. Leonidas told Xerxes "MOLON LABE", or "Come And Get Them."

    NRA member and proud Texas CHL holder

  8. #8
    Supporting Member

    Member #
    4403
    Join Date
    Sep 2008
    Location
    Galveston Bay is an Hour Away ©
    Posts
    11,504
    Liked
    3278 times
    Isopropanol. Gotcha.


    NRA Life Member - TSRA Member

 

 

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Disassembly and cleaning of Raging Bull?
    By Mouse07410 in forum Smithing
    Replies: 15
    Last Post: 06-07-2012, 08:21 PM
  2. TCP Disassembly, Cleaning, Reassembly Video
    By sherlock in forum The 700's
    Replies: 3
    Last Post: 07-28-2010, 07:35 AM
  3. Savage rifle cleaning
    By rodfair in forum Other Long Arms
    Replies: 3
    Last Post: 03-15-2010, 04:47 PM
  4. Barrel Scratches/ file marks found upon first disassembly
    By eddiestang in forum Taurus 1911's
    Replies: 12
    Last Post: 03-02-2009, 07:40 PM

Search tags for this page

savage .22 model 64 manual
,
savage 64
,

savage 64 cleaning

,

savage 64 disassembly

,
savage 64 fxp maul
,
savage 64 tear down
,
savage model 64 22 long rifle teardown diagram
,
savage model 64 breakdown
,
savage model 64 cleaning
,
savage model 64 disassembly
Click on a term to search for related topics.