Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Like Tree1Likes

Thread: PT 24/7 trigger job

  1. #1
    Junior Member
    Member #
    662
    Join Date
    Apr 2007
    Posts
    1
    Liked
    0 times

    PT 24/7 trigger job

    hey guys,

    i recently started going to the range again now that my schedule allows some free time...and i'm having issues with the trigger pull on my taurus

    i purchased a PT 24/7 two years ago and it has been a great gun overall, no jams after first mag/mechanical problems with around 2k rounds, but it was my first handgun so i didn't have much to compare it to

    so i went to the range with a friend and shot his glock 30/.45, taurus PT 1911b .45, ruger service six .357, and walther p22 and after shooting those guns and jumping back to my PT 24/7 i cant stand the long trigger pull anymore

    is there anything that can be done to give the trigger a lighter pull? it just feels 'strange' after shooting a few different guns

    i'm tempted to sell it to buy the taurus 1911 now thought that thing is smoooooth



    AK

  2. #2
    Moderator

    Member #
    4
    Join Date
    Jan 2007
    Location
    Wisconsin
    Posts
    24,887
    Liked
    5527 times

    Re: PT 24/7 trigger job

    There are no drop in parts to make things smoother as you put it. Messing with the trigger pull would invalidate the warranty.

    Most DAO ,or the new Taurus DA/SA style type triggers break in the 6 to 8 pounds of pull category. Some may be more than that. So do Glocks and other similar guns.It is the nature of the beast.

    This is a use the way it is or get the PT1911. The Complete Book of Autopistols and Gun Tests give the PT1911 and PT145 high marks in all areas. So there is positive press out there for Taurus products. Even the 24/7 is getting good vibes with gun writers.

  3. #3
    Super Moderator Emeritus

    Member #
    80
    Join Date
    Jan 2007
    Location
    Oklahoma
    Posts
    785
    Liked
    88 times

    Re: PT 24/7 trigger job

    Before you envy the Glock's trigger too much... do some reading "glock + accidents" on google, or http://www.motherjones.com/news/feat.../01/glock.html.

    Try to guage the weight of the trigger pull... if it seems excessive, contact Taurus. If it is just the "length" of the pull... remember that the older Taurus models had no "pre-cocked" springs. The light trigger pull on Glocks (and a great many other pistols is due to the gun being cocked" during the slide cycle (just as the 3rd Generation now do).

    Any time the gun is "pre-cocked" you are ready to fire. The Glock gives you ONLY the trigger safety... and obviously it doesn't work all the time as intended. At least the newer Taurus include the safety which put the gun into a "cocked & locked" mode.

    For a CCW the early DAO models were great... you had to intentionally know you were going to shoot them.
    [size=14pt]Senior Grand Master Tin Can Shooter and Paper Target Puncher[/size]

    PT1911: Burnished Slide,
    Colobolo Grips,
    Millett 100
    Low Profile rear
    PT145: with HIVIZ
    Front Sight
    Browning
    Hi-Power,
    Green sealed
    Fiber Optic

  4. #4
    Senior Member
    Member #
    571
    Join Date
    Mar 2007
    Location
    Iowa
    Posts
    1,032
    Liked
    24 times

    Re: PT 24/7 trigger job

    The newer PRO model of the 24/7 has the short pull DA/SA trigger, the older model like mine is DAO only, which I happen to like for a CCW (no accidental firing).
    PT92 old model
    PT92 decocker
    PT99 decocker
    PT1911 45cal
    PT1911 45cal AR
    2x PT1911 45cal SS
    PT1911 45cal DUOTONE
    2x PT1911 9mm (one blued and one SS)
    PT24/7 45cal DAO
    PT24/7 PRO LS 45cal
    2x 24/7 OSS SS 45cal/9mm
    2x PT24/7 9mm standard and 9mm compact
    PT145
    PT745 PRO 45
    PT911
    PT908
    PT945 Factory Ported
    TAURUS 709 SS
    JUDGE Public Defender Polymer SS
    JUDGE Magnum 3"
    TAURUS 738 TCP 380
    TAURUS 738 TCP 380 SS/Rasberry (For the Wife.... Seriously)

  5. #5
    Senior Member
    Member #
    121
    Join Date
    Jan 2007
    Location
    Houston TX
    Posts
    967
    Liked
    53 times

    Re: PT 24/7 trigger job

    If you decide to sell your 24/7 let me know how much you want for it

  6. #6
    Senior Member
    Member #
    422
    Join Date
    Feb 2007
    Location
    northern ohio
    Posts
    174
    Liked
    0 times

    Re: PT 24/7 trigger job

    not to sound like a jerk, but has anyone fussed w/ these triggers? i have to agree w/ the first post, the trigger is very nice, but very difficult to switch from one gun to another, the taurus pull is very unique. that being said, has anyone played w/ the trigger successfully/safely?
    God loves you........... yep even on them days

  7. #7
    Super Moderator Emeritus

    Member #
    80
    Join Date
    Jan 2007
    Location
    Oklahoma
    Posts
    785
    Liked
    88 times

    Re: PT 24/7 trigger job

    The trigger on the 24/7 is the same system used on the Mil Pro... it is a trigger "bar" and a catch on the firing pin... the bar draws the catch to the rear until it is forced of move down and release the catch, releasing the firing pin. Polishing these surfaces would be an exceedingly difficult task without creating problems. Unlike some guns, there is no danger of "going full auto" but you even if you could "smooth" the engagements, the length and weight of the trigger pull is a product of the firing pin compression and that can't be changed.

    Many folks have found the best approach for the DAO is to just be aggressive about pulling the trigger (don't jerk... but don't try to feel for the release). These guns have an inherant safety in that pulling the trigger must be an intentional act. I just learned to treat my 24/7 9mm like a DAO revolver... best be about it once you start the act.
    [size=14pt]Senior Grand Master Tin Can Shooter and Paper Target Puncher[/size]

    PT1911: Burnished Slide,
    Colobolo Grips,
    Millett 100
    Low Profile rear
    PT145: with HIVIZ
    Front Sight
    Browning
    Hi-Power,
    Green sealed
    Fiber Optic

  8. #8
    Moderator

    Member #
    4
    Join Date
    Jan 2007
    Location
    Wisconsin
    Posts
    24,887
    Liked
    5527 times

    Re: PT 24/7 trigger job

    Cimarron. That info might make a good sticky or be included in a FAQ.

  9. #9
    Junior Member
    Member #
    268
    Join Date
    Jan 2007
    Posts
    29
    Liked
    1 times

    Re: PT 24/7 trigger job

    Quote Originally Posted by theprophet
    hey guys,

    i recently started going to the range again now that my schedule allows some free time...and i'm having issues with the trigger pull on my taurus

    i purchased a PT 24/7 two years ago and it has been a great gun overall, no jams after first mag/mechanical problems with around 2k rounds, but it was my first handgun so i didn't have much to compare it to

    so i went to the range with a friend and shot his glock 30/.45, taurus PT 1911b .45, ruger service six .357, and walther p22 and after shooting those guns and jumping back to my PT 24/7 i cant stand the long trigger pull anymore

    is there anything that can be done to give the trigger a lighter pull? it just feels 'strange' after shooting a few different guns

    i'm tempted to sell it to buy the taurus 1911 now thought that thing is smoooooth



    AK
    The 24/7 is designed to be a self defense weapon, always ready to fire, but remaining safe at all times. And this it does as well or better than most of the other current offering of "black" guns.

    The problem you have encountered is that being ready to fire and safe at the same time has its tradeoffs. My 24/7 Pro LS has a long trigger but comparatiively light. I have fired it enough to know it will go bang every time, and cycle every time, yet remain safe while ready to fire. Confidence and familiarity with your weapon are the best attributes you can have going into a life threatening situation. If you have to fire your gun in combat, the only thing you should be aware of is your target. The 24/7 will get the job done.

    Recreational shooting with your primary defense weapon is the best thing you can do. But be aware that you purchased the 24/7 as a self defense weapon, and you have lots of trigger time invested in it, and you are now familiar with its operation and capability.

    I have many 1911's and I shoot them for recreation, and in competition. They are great guns and I suggest that you save up to get one, or two, or .... It can become an addiction. But I wouldnt throw the 24/7 overboard because its not a 1911, or any of the other mentioned guns.
    MadKaw likes this.

  10. #10
    Senior Member
    Member #
    422
    Join Date
    Feb 2007
    Location
    northern ohio
    Posts
    174
    Liked
    0 times

    Re: PT 24/7 trigger job

    i agree completely, but like lots of others, i have guns that i shoot for competition type fun and have done trigger work and a host of other things to, but would never consider them as a carry weapon, and you are right, they would not be safe to use in that role, my 24/7 gets roughed up allot just hanging out w/ me all day, and yes i am very confident it will go bang if i ever need it to, and that it won't until such a time.

    it is still a little bit of a learning curve everytime you go out and practice again, getting used to it again. after shooting other guns and going back to it, my first shot is almost always high and right, which is bad because that is the one that may matter someday, at least the 2nd is always real close to where it should be.
    God loves you........... yep even on them days

 

 
Page 1 of 2 12 LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

taurus 24 7 trigger job

,
taurus 24/7 g2 trigger adjustment
,
taurus 24/7 g2 trigger job
,

taurus 24/7 trigger job

,

taurus 24/7 trigger pull

,
taurus pt 24 7 trigger pull
,
taurus pt 24 7 trigger pull adjustment
,

taurus pt 24/7 trigger

,
taurus pt 24/7 trigger pull
,
taurus pt24/7 trigger
Click on a term to search for related topics.